Every year, homeowners deal with some type of flooding in the home. Assuming the home is still structurally sound, it may be possible to clean the rooms and make the house fit for habitation once more. With the aid of a checklist, it is possible to know how to get through the process and reclaim the home.
Have a Contractor Inspect the Home
Your first step is have a contractor conduct a full inspection of the home. Nothing will go unchecked. From the frame of the house to the wiring and plumbing, the goal is to determine the scope of the damage and what it will take to make repairs. A contractor will know how to identify damage that is not readily apparent to the untrained eye.
Checking the Ceiling
The contractor will note any sags in the ceilings and determine if any there is any remaining water present. This can be done by imbedding a nail into the end of a plank or long dowel. The contractor will use the handmade device to create punctures near the walls. If no liquid spurts from the holes, the professional will try a few more punctures closer to the center of the room. As any water does escape, the pressure on the ceiling is alleviated. That makes it easier for the contractor to decide what must be done to repair the damage.
Addressing the Flooring
When it comes to flooring, it is important to remove every type of floor covering. Trying to save carpeting after a flood is essentially a useless endeavor. In like manner, linoleum, vinyl tiles and any other coverings should also be removed, even if they appear to be undamaged. The idea is to expose the bare floor to the open air, preventing the growth of mold and mildew between the flooring and any decorative covering. Open all doors and windows. This includes interior doors to closets and cabinets. Letting plenty of fresh air into the home will help dry out the home and thus minimize the growth of mold and mildew.
Once you are sure the power supply to the home has been cut, disconnect all electrical appliances such as refrigerators, lamps and televisions. Each appliance should be inspected to determine if it is salvageable. After the appliances are unplugged and out of the way, remove all plates covering switches and sockets. This will make it easier for fresh air to get into the walls and speed up the process of drying out those areas.
Getting Water Out of the Walls
Remember to remove all baseboards and punch in small holes roughly two inches above the floor line. The holes can be made using a screwdriver and a hammer. This will allow water that has settled in between the walls to drain out where it can be mopped up.
What About the Heating and Cooling System?
For homes with central heating and cooling systems, have the duct work cleaned and disinfected. This will prevent the growth of mold and mildew that could put your family's health at risk.
The Right Cleaning Products
The contractor can arrange for a professional service to clean the home. Every nook and cranny will receive attention. This is because mold and mildew can develop and proliferate if even the tiniest area is overlooked.
Just before the crew shows up to start the cleaning, take pictures of the damage. These will come in handy later when you file a claim for the damage.
A Second Inspection
Always have the home professionally inspected before attempting to have utility services restored to the house. The goal is to make sure the wiring and plumbing are once again sound. Utility companies have inspection equipment that can identify potential problems and allow you to address them before attempting to live in the house again.
A flood does not have to be the end of a house. With help from professionals from a company like Orange Coast Plumbing, you can bounce back and enjoy the home for many years to come.